Notice: Function _load_textdomain_just_in_time was called incorrectly. Translation loading for the wordpress-seo domain was triggered too early. This is usually an indicator for some code in the plugin or theme running too early. Translations should be loaded at the init action or later. Please see Debugging in WordPress for more information. (This message was added in version 6.7.0.) in /var/www/html/wp-includes/functions.php on line 6260 Fluo HTI-2 - Coatings World

What are you searching for?

Sign in
Product Spec Sheets

Fluo HTI-2

Released By Micro Powders

FLUO HTI-2 is a micronized polytetrafluoroethylene (PTFE) which has been developed for use in areas where excellent heat resistance, slip and rub resistance are required. FLUO HTI-2 has been processed to a 1.0-2.0 NPIRI grind gauge reading to allow for easy dispersion into printing inks and coatings. Due to its very fine particle size, FLUO HTI-2 can either be pre-dispersed into a paste or added directly into most inks and coatings with conventional mixing equipment.

FLUO HTI-2 is most effective when used at low levels (1/2-1%) as an additive to either our MP grades of micronized synthetic waxes or our MPP grades of micronized polyethylenes. A low percentage of FLUO HTI-2 gives the most dramatic improvement. The addition of a small amount of FLUO HTI-2 along with our grades of waxes or polyethylenes allows each material to perform with maximum efficiency.

FLUO HTI-2 is especially recommended for use in Heat-Set, Quick-Set, IR, UV and Metal Decorating Printing Inks and Overprint Varnishes as well as Industrial and Release Coatings.

At temperature above 600°F, some polymer fumes may be emitted due to oxidation of the fluorocarbon polymer. Therefore, smoking should not be permitted when working with this material. Refer to MSDS.

Download Product Spec Sheets Now

Download Product Spec Sheets Now

Keep Up With Our Content. Subscribe To Coatings World Newsletters